Skip to content

General Surgery Retractors

Hasson Retractor: Uses, Design, Sizes & Buying Guide

Author: Saad Shahid · Updated · 7 min read

Hasson S Retractor shown on a navy Retractor Maker banner.
Hasson S Retractor for open laparoscopic access.

Learn how a Hasson retractor supports open laparoscopic access, compare blade options, and review positioning, sterilization, and purchasing essentials.

Retractors discussed in this guide: Hasson S Retractor. Browse all surgical retractors.

A hasson retractor is a handheld surgical instrument used to retract umbilical fascial margins and elevate the abdominal wall during open Hasson laparoscopic cut-down procedures. Its role is to improve exposure at the access incision while the surgical team prepares for cannula placement. Retractor Maker supplies the Hasson S Retractor, a double-ended instrument with S-curved blades. For surgeons, OR staff, and hospital buyers, the important distinctions are its fascial application, blade width, rigid or malleable design, and non-sterile supply condition.

What is a Hasson retractor?

The Hasson S Retractor is a handheld fascial retractor intended for the open-entry stage of laparoscopy. Rather than maintaining exposure through a self-retaining mechanism, it requires controlled manual positioning. Its double-ended S-shaped configuration provides a working blade at either end, allowing the operator to select the appropriate end and orientation for the exposure required.

The retractor is an exposure instrument, not a cannula or a cutting instrument. It helps present the fascial margins and supports abdominal wall elevation during the cut-down approach. Understanding that distinction helps purchasing teams identify the correct item when a surgical preference card requests instruments for Hasson entry rather than a complete laparoscopic access system.

What is a Hasson retractor used for?

Its specified use is retracting umbilical fascial margins and elevating the abdominal wall during open Hasson laparoscopic cut-down procedures. The instrument supports exposure and cannula placement at the entry site. It should be selected according to the planned access technique, not simply because the operation is laparoscopic.

  • Fascial exposure: holds the umbilical fascial margins away from the working area.
  • Abdominal wall elevation: supports controlled lifting during the open cut-down approach.
  • Cannula placement: helps maintain exposure while the access cannula is positioned.
  • Entry-set preparation: provides a dedicated fascial retraction option when the operative plan includes open Hasson access.

Open laparoscopic access may be used in general surgery, gynecology, and other abdominal surgical specialties. However, a specialty name alone does not establish suitability for a particular case. The relevant question is whether the surgeon plans an open umbilical cut-down and needs this form of fascial retraction. Instrument choice remains dependent on anatomy, exposure requirements, and clinical judgment.

What are the design, parts, and dimensions?

The Hasson S Retractor combines a handheld double-ended configuration with S-curved blades. Its overall length is 18.5 cm (approx. 7.3 inches), and available blade widths are 10.0 mm wide or 13.0 mm wide. These dimensions describe the listed product; buyers should confirm the requested width rather than assume a standard configuration will be supplied.

Blade shape and tissue contact

The blade architecture consists of S-curved dual-ended blades with smooth, rounded non-traumatic lips. The curved ends provide the working surfaces for fascial exposure. The term non-traumatic describes the supplied blade design, not a guarantee against tissue injury. Contact location, applied force, duration of retraction, and ongoing observation still matter whenever tissue is held under tension.

Material and supply condition

The listed material is Premium Grade AISI 304/316 Stainless Steel (Non-Magnetic). The instrument is brand new, supplied in Individual Protective Packaging, and supplied non-sterile while being fully autoclavable. Protective packaging is not a sterile barrier claim. OR and sterile processing teams must therefore distinguish delivery condition from readiness for use in a sterile surgical field.

Which Hasson S Retractor variants are available?

The supplied product information identifies rigid and malleable designs, alongside two available blade widths. These are options within the Hasson S Retractor product, not separate named product families. The comparison below separates design choices from width choices; it does not establish that every possible combination is stocked.

Product or optionDesignTypical use
Hasson S Retractor — rigid designRigid, handheld double-ended S-shaped fascial retractorUmbilical fascial retraction and abdominal wall elevation during open Hasson access
Hasson S Retractor — malleable designMalleable design with double-ended S-curved bladesThe same specified open Hasson access application, where a malleable design is requested
Hasson S Retractor — 10.0 mm blade option10.0 mm wide blade optionFascial exposure and cannula placement when this width is selected
Hasson S Retractor — 13.0 mm blade option13.0 mm wide blade optionFascial exposure and cannula placement when this width is selected

Select width according to the intended exposure and the surgeon’s preference. A wider option should not automatically be treated as more suitable, and a narrower option should not automatically be considered less traumatic. Confirm the exact design and width combination with Retractor Maker before ordering, especially when matching an existing tray or preference card.

How is a Hasson retractor positioned and used?

A trained surgical professional positions the working blade to expose the intended fascial margin under direct visualization. The goal is controlled retraction that supports the planned open-entry technique without unnecessary tissue tension. This overview explains the instrument’s role; it is not a substitute for surgical training, the operative plan, or applicable manufacturer instructions.

  • Before use, verify the requested instrument configuration, processing status, and visible condition.
  • Select the working end and orientation that suit the exposure required.
  • Maintain visibility of the tissue contact area and avoid blind placement against underlying structures.
  • Coordinate retraction with the operating surgeon during exposure and cannula placement.
  • Reassess contact and tension as the operative field changes, and release retraction when no longer needed.

Because this is a handheld retractor, communication between the surgeon and assistant is important. Changes in hand position can change the direction of tissue traction. If exposure is inadequate, reassess positioning and instrument selection rather than simply increasing force. For a malleable design, obtain the applicable handling instructions before attempting to alter its shape.

How should it be cleaned and sterilized?

The Hasson S Retractor is supplied non-sterile and is fully autoclavable. It must undergo appropriate processing before sterile surgical use. Autoclavability identifies compatibility with steam sterilization, but it does not provide a complete reprocessing protocol. The supplied product information does not specify cycle parameters, cleaning agents, or a detailed reprocessing sequence.

Request the current manufacturer’s reprocessing instructions and follow the facility’s validated procedures. General reusable-instrument care includes controlling soil after use, thorough cleaning, rinsing, drying, and inspection before packaging and sterilization. Pay attention to the curved blade surfaces and lips during inspection. Visible soil, damage, or an uncertain processing history should be resolved before the instrument is released for clinical use.

Do not select an autoclave cycle from the material description alone. Sterilization parameters and loading requirements must be compatible with the instrument instructions and the facility’s validated process. After processing, preserve package integrity and store the instrument according to local sterile storage procedures.

How do you choose and buy from Retractor Maker?

Choose by clinical application, blade width, design preference, and processing requirements. Retractor Maker is a surgical retractor manufacturer and exporter in Sialkot, Pakistan, offering wholesale supply, OEM services, and worldwide shipping. The listed minimum order quantity for the Hasson S Retractor is 1 Piece.

For a quotation, identify the product as Hasson S Retractor, reference hasson-s-retractor, and state the requested width, rigid or malleable design, quantity, and destination. Ask for confirmation of the exact configuration, current processing instructions, availability, and shipping terms. For OEM inquiries, describe the requested requirements for review rather than assuming an unlisted modification is available.

Before acceptance, align the purchase specification with the surgeon’s preference card and sterile processing requirements. Confirm that receiving staff expect a non-sterile instrument in protective packaging. This helps prevent confusion between a delivered product and an instrument ready for the sterile field.

Clinical notice: This guide is for surgical teams and hospital buyers. Always follow the manufacturer's instructions for use (IFU) and your hospital's sterilization rules before clinical use.

Frequently Asked Questions

What is a Hasson retractor used for?

A Hasson retractor is used to retract umbilical fascial margins and elevate the abdominal wall during open Hasson laparoscopic cut-down procedures. The Hasson S Retractor supports fascial exposure and cannula placement. It is an exposure instrument used during access, rather than a cannula, cutting instrument, or complete laparoscopic entry system.

What size is the Hasson S Retractor?

The Hasson S Retractor is 18.5 cm (approx. 7.3 inches) long, with available blade widths of 10.0 mm or 13.0 mm. These are the dimensions provided for the listed product. Buyers should specify the required blade width and confirm its availability with the selected rigid or malleable design before ordering.

Is the Hasson retractor self-retaining?

The listed Hasson S Retractor is handheld, not self-retaining. A surgical professional maintains its position and controls tissue traction during exposure. Its double-ended S-shaped configuration provides a working blade at either end, but it does not include a listed mechanism for independently holding the operative field open.

Can a Hasson S Retractor be autoclaved?

The Hasson S Retractor is fully autoclavable and supplied non-sterile. It requires appropriate processing before sterile surgical use. The supplied product details do not include sterilization cycle parameters, so sterile processing teams should obtain the current manufacturer’s instructions and use a compatible, validated facility process rather than infer settings from its material.

What is the Hasson S Retractor made of?

The listed material is Premium Grade AISI 304/316 Stainless Steel (Non-Magnetic). The product also has S-curved dual-ended blades with smooth, rounded non-traumatic lips. Material and blade design do not remove the need for careful tissue handling, inspection, and validated processing before the instrument enters the sterile field.

Where can hospitals buy a Hasson S Retractor?

Hospitals can request the Hasson S Retractor from Retractor Maker, a manufacturer and exporter in Sialkot, Pakistan. Wholesale supply, OEM services, and worldwide shipping are available, and the listed minimum order quantity is 1 Piece. Include the preferred blade width, rigid or malleable design, quantity, and destination when requesting a quotation.

About the author

Saad Shahid · Sales & Marketing Manager

Saad Shahid is the Sales & Marketing Manager and founder of Retractor Maker, started in 2023 in Sialkot, Pakistan. He also works with his father at Hospitech Traders, the family surgical instrument business founded in 1989.

See All Blogs & Guide
All Retractors

Need Surgical Retractors or Components?

Tell us what you need, including the product, configuration, quantity and destination country. Retractor Maker can provide availability, specifications and pricing.

Request a Quote

Tell us the configuration you need and we will quote it properly.

Send your product list, quantity and destination country. Our team replies with availability, specifications and pricing — no cart, no checkout, no account required.

24/7 Available